Rugged Cams Vertex & Vertex RTH - Manual (Page 66)

65
① Connect the storage device with an upgrade file stored in the USB 2.0 port at the back.
② Select {Upgrade} using the arrow keys and the Select button.
③ The upgrade file list stored in the selected device and simple version information for the
selected file are then displayed.
④ After selecting the file to be upgraded, press the [SELECT] button.
※ Downgrading to a previous version is not supported.
※ The upgrade information window will then appear within 15 seconds.
Read the information and select {Yes} to start the upgrade gradually. Select {No} to return to
{System} mode.
⑤ After the update is completed, the system will be rebooted.
⑥ The system will automatically start. Upgrade is then completed.
⑦ Select {Status} {Product Information} {Software Version}.
11) Reset All Setting
① Select {Reset All Setting} using the arrow keys and the Select button.
② When prompted whether to reset all setting, select Yes.
Note that all setting data will be reset.
※ The factory setting will be restored.
12) PTZ Home Position Time
This feature enables Preset1 to be executed automatically for the corresponding PTZ if no
control occurs for a specific amount of time after controlling the PTZ. Preset 1 replaces the
Home Position feature.
① Select {PTZ Home Position Time} using the arrow keys and the Select button.
② On the selection window, select the time using the arrow keys and the Select button.
13) PTZ Control Type
① Select {PTZ Control Type} using the arrow keys and the Select button.
② On the selection window, select the type using the arrow keys and the Select button.
A-Type This is a method wherein the corresponding command
(Pan/Tilt/Zoom/Focus) is sent in case of key input; a Stop command
is not sent pending another key input.
B-Type In case of key input, the corresponding command
(Pan/Tilt/Zoom/Focus) is sent. In the absence of another key input
within a specific time (about 0.5 second), the Stop command is sent.