Rugged Cams Vertex & Vertex RTH User Manual

Page 63

User Setup

The user can enter the time directly.

The time can be set to 5 ~ 99 seconds.

※

③

Selecting User Setup causes the input window to appear.

④

Enter the time using the numeric buttons or the arrow keys and the Select button.

4) Rename DVR

①

Select {DVR Name} using the arrow keys and the Select button.

②

On the input window, enter a name using the numeric buttons or the arrow keys and the

Select button (the system name may contain up to 20 English characters).

5) Remote Controller ID

When multiple devices are used, set the remote controller ID to identify input signals from a
remote controller.

Only the system wherein the DVR ID and remote controller ID match can receive input

signals from the remote controller as shown below.

DVR ID : 1

DVR ID : 2

DVR ID : 3

Remocon ID : 1

●
●
●

①

Select {remote controller ID} using the arrow keys and the Select button.

②

Enter the ID (between 0 and 99) using the numeric buttons or the arrow keys and the

Select button.

※

If you forgot the DVR ID, set the remote controller ID to 999 to start the DVR.

※

Note, however, that the DVR ID should be the same as the remote controller ID.