Rugged Cams Vertex & Vertex RTH - Manual (Page 14)

13
2-2 Installation and Connection
2-2-1 Basic Connection
Connect the CCTV cameras, CCTV monitor (or PC monitor), and USB mouse to the DVR
as shown below.
Connected Device DVR Terminal
1 CCTV camera Video input
2 CCTV monitor (or PC monitor) TV (or VGA)
3 Mouse USB
1. The input video type must be either NTSC or PAL; these two types must not
be used together.
2. Select the input video format (NTSC/PAL) using the Config switch on the rear
side of the product.
3. Select the output monitor type (VGA/TV) using the Config switch on the rear
side of the product.