Rugged Cams Vertex & Vertex RTH - Manual (Page 51)

50
① Select {Name} for the camera channel using the arrow keys and the Select button.
② On the selection window, select the first row and enter the name of the camera channel.
(2) Covert
Used to hide the channel video on the real-time monitoring screen
③ Select {Name} for the camera channel using the arrow keys and the Select button.
④ On the selection window, select the second row and decide whether to hide or display
the camera channel.
※ Video data is saved on the real-time monitoring screen even though they are not displayed.
(3) Connection
Used to set whether to connect or disconnect each camera channel
① Select {Name} for the camera channel using the arrow keys and the Select button.
② On the selection window, select the third row and decide whether to connect or
disconnect the camera channel.
※
When the camera channel is set to disconnected, the video contents will not be displayed
even if the camera is actually connected.
2) Recording
Used to set the resolution, recording quality, recording type, recording frame, and audio
recording status
(1) Resolution
Used to set the resolution of the recorded channel
① Select {Recording} {Res.} for the channel using the arrow keys and the Select
button.
② On the selection window, select the Resolution.
To set all channels at the same time, go to the top of the (Resolution) column and press
the [Select] button.
Resolution by Video Type
Type
Resolution
NTSC PAL
CIF 352 240 ⅹ 352 288 ⅹ
Field 704 240 ⅹ 704 288 ⅹ
Full 704 480 ⅹ 704 576 ⅹ