Rugged Cams Vertex & Vertex RTH - Manual (Page 52)

51
(2) Quality
Used to set the quality of the recorded video
① Select {Recording} (Qual.) for the channel using the arrow keys and the Select
button.
② On the selection window, select the recording quality.
The bigger the file size is, the higher the resolution. ※
To set all channels at the same time, go to (Quality) on top of the column and press the
[Select] button.
(3) Mode
Used to set the recording type for the channel
① Select {Recording} {Mode} for the channel using the arrow keys and the Select
button.
② On the selection window, select the recording mode.
Recording
Type Description
Automatic
Set the event recording speed and normal recording speed separately.
Recording is carried out by automatically selecting the recording mode
based on each setup value.
Continuous Continuous recording is done based on the normal frame value.
Motion
Recording is done based on the event frame setting in case motion is
detected.
Sensor
If input signal is generated from an external sensor, recording is done
based on the event frame setting.
Sound
When sound is detected, recording will be done based on the event
frame value.
Recording Conditions
Recording
Type Setting
Continuous {Record} {Rate} Normal: 1~30
Motion {Event} {Motion}: Part or All
Sensor {Event} {Sensor}: 1~16
Sound {Event} {Sound}:1~16
{Record} {Rate}
Event: 1~30
Automatic Enables setting both Normal and Event simultaneously
To set all channels at the same time, go to the top of the {Mode} column and press the Select
button.
(4) Frame
Rate
Depending on the recording mode, the recording frame can be divided into the Normal type
and Event type.