Remote Processing CAMBASIC - Manual (Page 178)

CON FIG C ommands - 5
CONFIG CLOCK
Statement
SYNTAX: CONF IG CLOC K mode,run
CONF IG CLOC K run (RPC-2350 ser ies only)
PURPOSE: Configures real time clock for 12 or 24 hour modes and starts or stops the clock.
REMARK S: The T IME $ function r eturns the tim e in 12 or 2 4 hour fo rma ts. Set mode = 0 for 12 hour time and
1 for 24 ho ur time form at.
run turns the clock on and off. 0 = off or stopped, 1 = on or run.
RELATED: TIME$, DATE$
EXAMPLE: CONFIG CLOCK 1,1
Sets to clock to 24 hour mode and starts it running.
CONFIG CLOCK 1 Starts clock (2350 series only)
ERROR: < Data out of range> - if data other than 0 or 1 are used.