Remote Processing RPC-2350 - Manual

RPC-2350 USER'S MANUAL
i
Copyr ight 2001 - Re mote P rocessing Cor poration. All
rights reserved. However, any part of this document
may be reproduc ed with Remote Proce ssing cited as the
source.
The con tents of this ma nual and the sp ecifications her ein
may change without notice.
TRADEMARKS
CAM BASIC™ and PC Sm artLINK™ are trademar ks of
Octagon Systems Corpor ation.
Microsoft® BASIC is a trademark of M icrosoft
Corpor ation.
Microsoft® Windows®, Windows 95® , and Windows
98® are trademar ks of Microsoft Corpor ation.
Windows Ter minal is registered with Microsoft
Corpor ation.
Hyper Ter m is copyr ight by Hilgr aeve Inc. and is
developed for Microsoft Cor poration.
Procomm is copyright by Datastorm Technologies, part
of Symantec Corpor ation
Remote Pr ocessing Corporation
7975 E. Har vard Ave.
Denver, Co 80231
Ph. : (303) 690 1588
Fax: (303) 690 1875
www. rp3.c om
[email protected]
NOTICE TO USER
The infor mation co ntained in this m anual is believe d to
be correct. However, Remote Pr ocessing assumes no
responsibility for any of the circuits described herein,
conveys no license under any patent or other right, and
make no repre sentations that the circuits are free from
patent infringement. Rem ote Processing makes no
representation or warr anty that such applications will be
suitable for the use specified without further testing or
modification. The user must decide fitness for a
particular use.
Remote Pr ocessing Corporation' s general policy does not
recomm end the use of its products in life support or
applications where the failure or malfunction of a board
may threaten life or injury. Install redundant or backup
safety systems as appropriate to the application.
FCC AND EMI NOTICE
The RPC-2350 and RPC-2350G is intended as an OEM
product in an industrial environment. It was not tested
for E MI r adiation. When op erated o utside a suitable
enclosure, the board and any cables com ing from the
board w ill radiate har mful signals th at interfer e with
consumer and industrial radio frequencies. It is your
responsibility properly to shield the RPC-2350/ 2350G
and cables coming from it to prevent such interference.
P / N 1761
Revision: 1.4