Precision Digital PD6830 - Manual (Page 88)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
88
OPERATION
Front Panel Buttons Operation
Symbol Description
 Hold the Menu SafeTouch® button when in power save mode
(display will show ) to awaken SafeTouch® buttons.
 Press the Menu button to enter Programming Mode.
 Press the Menu button during Programming Mode to return to the
previous menu selections.
 Hold the Menu button for 1.5 seconds at any time to exit Pro-
gramming Mode and return to Run Mode.
 Press and hold the Menu button for 3 seconds to access the Ad-
vanced
Features of the meter.
 Press the Right arrow button to move to the next digit or decimal
position during programming.
 Press Right to go backward through most selection menus.
 Press Reset to reset the total, or values displayed in the bottom
display (grand total, max, or min). Press Enter after Reset to
confirm the reset.
 Press Display when in Run mode to display the grand total, again
to display the maximum, and again to display the minimum read-
ing since last reset. These displays will time out in 12 seconds, or
press Display until total is displayed in the lower display. Press
Enter to lock this display, and disable the 12 second time out.
 Press the Up arrow button to scroll forward through the menus,
decimal point, or to increment the value of a digit.
 Press the Enter button to access a menu or to accept a setting.
 Press Enter to lock the grand total, maximum, or minimum value
on the lower display, and disable the 12 second time out.
 Press Enter while the grand total, max, or min reading is locked
on the lower display to return to run mode.
 Press Enter to acknowledge alarm (if enabled).
Press Enter to lock display of grand total, Max or Min readings
(disables 10 second timeout).
MENU
RESET
DISPLAY
ENTER