Precision Digital PD6830 - Manual (Page 67)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
67
Scaling the Meter (SCale)
The pulse input can be scaled to display the process variable in engineering units.
A signal source is not needed to scale the meter; simply program the inputs and
corresponding display values.
A programmed scaled input will work with Automatic Unit Conversions as described
on page 46. The units for the display values that must be entered are a combination
of the programmed Rate Unit and the time unit (Time UNIT) entered in the Scale
menu.
For example, if the Rate Unit is gallons, and the time unit (Time UNIT) is seconds,
the units for the display values entered in the Scale menu are gallons/second.
For instructions on how to program numeric values see page 30.