Precision Digital PD6830 - Manual (Page 44)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
44
Total Units (tot U)
This menu is used to select the display units for the total. The base unit and a
multiplier prefix are selected. If total and units are selected to display, the multiplier
prefix will appear before the total unit (example: MGAL, kL).
Multipliers will convert the total for 1, 100, 1000, or 1 million units. The meter will
calculate the total appropriately for display with the programmed multiplier and units.
A custom unit may be selected (CUST), and no multiplier menu will be required. In this
case, use the total conversion factor as defined in Custom Units Total Conversion
Factor on page 47.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.