Precision Digital PD6830 - Manual (Page 30)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
30
Setting Numeric Values
The numeric values are set using the Right and Up arrow buttons. Press Right
arrow to select next digit and Up arrow to increment digit.
The digit being changed blinks.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.
The decimal point is set using the Right or Up arrow button in the Setup, Decimal
Point
menu.
Setting Alphanumeric Labels (LABEL)
Fully alphanumeric values are set using the Right button to select the digit, the Up
and Right arrow buttons to select the digit reading, and the Enter button to confirm
and select the next digit.
Menus using this entering method will display LABEL in the upper display. After
selecting the digit, and using the Up and Right arrows to modify the digit, the display
will read CHAR. Using Enter to confirm the new digit will return the display to reading
LABEL
.
The digit being changed blinks.
Press the Menu button to exit without saving changes.