Precision Digital PD6830 - Manual (Page 47)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
47
Rate Conversion Factor
is used to convert to a custom unit of rate display. For
example, to display rate as quantity of 2.5 gallon containers when the K-Factor units
are set to gallons, enter a conversion factor of 2.500.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.
Custom Units Total Conversion Factor (totCF)
The total conversion factor is only used when the Units for total have been set to
custom (CUST). This menu will not appear if standard display units are selected for
total.
Total Conversion Factor
is used to convert to a custom unit of total display. For
example, to display total as quantity of 2.5 gallon containers when the K-Factor units
are set to gallons, enter a conversion factor of 2.500.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.
Custom Units Grand Total Conversion Factor (GrtCF)
The grand total conversion factor is only used when the Units for grand total have
been set to custom (CUST). This menu will not appear if standard display units are
selected for grand total.
Grand Total Conversion Factor
is used to convert to a custom unit of total display.
For example, to display grand total as quantity of 2.5 gallon containers when K-
Factor units are set to gallons, enter a conversion factor of 2.500.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.