Precision Digital PD6830 - Manual (Page 45)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
45
Grand Total Units (GtotU)
This menu is used to select the display units for the grand total. The base unit and a
multiplier prefix are selected. If grand total and units are selected to display, the
multiplier prefix will appear before the total unit (example: MGAL, kL).
Multipliers will convert the total for 1, 100, 1000, or 1 million units. The meter will
calculate the total appropriately for display with the programmed multiplier and units.
A custom unit may be selected (CUST), and no multiplier menu will be required. In this
case, use the grand total conversion factor as defined in Custom Units Grand Total
Conversion Factor (GrtCF) on page 47.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.