Precision Digital PD6830 - Manual (Page 82)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
82
Log Time Setup (LOGTIME)
The Log Time menu contains four log points (LOG 1 to LOG 4). Each log time is
configured separately. For each daily log time desired, enable a log, and set the log
time for the hours and minutes the log is to be recorded. The time is set in real-time,
based on the real time clock setup.
The Log Time feature will roll-over, deleting the oldest data logs (in blocks of 8) when
the log is full and new logs must be recorded. This makes it the most useful for long-
term data logging.
Interval Setup (INTERVL)
The Interval menu sets the time interval for data logging. Every time interval, one
data point will be recorded. To enable interval data logging, enable the feature, and
set the interval time for the hours and minutes between each log.
If set to F.STOP, the Log Interval feature will not delete old data, and data logging will
stop when the log is full. This makes it the most useful for short periods and logging
specific functions.
If set to Cont, the Log Interval feature will delete the old data when full and continue
logging data. The Log Interval feature will roll-over, deleting the oldest data logs (in
blocks of 8) when the log is full and new logs must be recorded. This makes it the
most useful for long-term data logging.