Precision Digital PD6830 - Manual (Page 64)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
64
Scaling the 4-20 mA Analog Output (Aout)
The Analog Output menu is used to program the 4-20 mA output based on display
values.
The 4-20 mA analog output (if equipped) can be scaled to provide a 4-20 mA signal
for any display range selected for either the rate, total, or grand total. The output may
be disabled (DSABL), and will only output the minimum signal.
No equipment is needed to scale the analog output; simply program two display
values and corresponding mA output signals.
CAUTION
Please note that when power is
removed from the meter, the analog
output will drop below 1 mA.
Take this effect into consideration when
designing any system using the 4-20
mA output.