Epson EQUITY 386/33 PLUS - Manual (Page 82)

Removing Memory Modules
If you need to remove memory modules from your computer,
have your dealer do it for you or follow the steps below. If you
remove them yourself, check the table on page 4-19 to be sure
you remove SIMMs from the correct sockets.
Caution
It is safer to have your dealer remove SIMMs for you since
there is a danger of transmitting an electrostatic discharge
and damaging your components.
1. Remove the computer’s cover and subassembly as described
in Chapter 3.
2. Use your fingers or two small screwdrivers to pull away the
metal tabs that secure the SIMM at each end. Be careful not
to pull the tabs too far, or they may break.
metal tab
4-22 Installing and Removing Options