Epson EQUITY 386/33 PLUS - Manual (Page 75)

7. Secure the end of the card to the back of the computer with
the retaining screw.
8. Follow the instructions in Chapter 3 to replace the cover.
Then see “Post-installation Setup” at the end of this chapter.
If you installed a high-resolution graphics adapter card,
see “Using the Alternate VGA Connector,” below, for
instructions.
Removing an Option Card
If you need to remove an option card, follow these steps:
1. Remove the computer’s cover as described in Chapter 3.
2. Remove the screw securing the card to the back of the
computer and pull it straight up and out of the slot.
3. Cover the option slot opening with the original metal cover
and secure it with the retaining screw.
installing and Removing Options 4-15