Epson EQUITY 386/33 PLUS User Manual

Page 131

You can stop testing at any time and return to the main menu

by holding down

and pressing

The program

completes the current test before it stops.

You must enter certain parameters to run the hard disk and

diskette drive tests. If you use

to select these tests, the

program prompts you for the parameters immediately. If you

use

the program prompts you for the parameters during

the first pass of the test. If you perform the tests more than

once, the program uses the same parameters for each pass.

If you selected Passbound testing, the program displays the

pass number on the right side of the screen above the Run

time parameters window. For example:

Pass :

00001

If you entered

the

wait on error prompt,

the

program pauses if an error occurs. When you press

the

program continues testing.

Note

Tests selected with

and

remain selected until

Tests selected with

and

remain selected until

you cancel them. Be sure to press

to cancel all

you cancel them. Be sure to press

to cancel all

selections when you are finished running each set of tests.

Performing System Diagnostics

B-9