Epson EQUITY 386/33 PLUS - Manual (Page 38)

To display the current CPU speed, type
ESPEED only
and press
You see the following:
33.0 MHZ
<+> : Speed Up
<-> : Speed Down
: Exit
To change the speed when you see this display, press the
or key; then press to exit.
The processor speed you set remains in effect until you change
it using the ESPEED program again, a keyboard command, or
the SETUP program; or until you press the RESET button or
turn off the computer.
Entering the ESPEED command in a batch file
You may want to run the ESPEED program by including the
command in a batch file. Let’s say you have a program called
SLOWDOWN which requires a slower processor speed. You
could include the following commands in a batch file to start
the SLOWDOWN program:
ESPEED S
SLOWDOWN
You could name the batch file SLOW.BAT. Whenever you
need
to run the SLOWDOWN program, insert the program diskette
in drive A. Then type
SLOW
and press The computer
changes the speed to slow and starts the SLOWDOWN
program.
See your operating system manuals for instructions on creating
and using batch files.
2-6 Enhancing System Operations