Epson EQUITY 386/33 PLUS - Manual (Page 162)

8. If you see no error messages but there is something wrong
with the data in a file, the operating system or an
application program may have updated the storage
information on the diskette incorrectly. This is probably the
case if you have one of these problems:
Part of a file is missing
A file includes parts of other files
An expected output file is missing.
If you are using MS-DOS, use CHKDSK to make the necessary
repairs; see your MS-DOS manuals for instructions.
Diskette Drive Problems
If you see an error message or have difficulty with a diskette
drive, check the following:
1.
2.
3.
If you are having problems with a new diskette drive that
your dealer installed for you, consult your dealer about the
problem.
If you installed the drive yourself, did you carefully follow
all the instructions in Chapter 5 of this manual? Review
the instructions and check all the cable connections to make
sure you have installed it correctly.
Did you run the SETUP program to define the correct
type of diskette drive as part of the computer’s
configuration? Did you set the FDD option in SETUP to
Enabled? (See Chapter 2 of the Setup Guide for
instructions.)
C-14 Troubleshooting