Epson EQUITY 386/33 PLUS - Manual (Page 170)

6. If you installed a high-resolution graphics adapter card, did
you connect it to the alternate VGA interface with the
feature cable? See Chapter 4.
7. Did you perform the correct setup procedures for the
software you are using with the option card? If
necessary, see your software manual for instructions.
Mouse Problems
If you have trouble with your mouse, check the following:
1. Make sure that your mouse is securely connected to its
port on the back of the computer. Also, make sure you
have connected it to the correct port. See Chapter 1 of the
Setup Guide for more information.
2. If the mouse is connected properly, make sure that jumper
J2 on your computer’s main system board is set correctly
for your mouse. See Chapter 4 for more information.
3. Did you install the mouse driver correctly? See your software
manual and the documentation that came with your mouse
for instructions.
4. If you’re still having trouble, check the documentation
that came with your mouse for any troubleshooting
information, or contact your dealer.
C-22 Troubleshooting