Epson EQUITY 386/33 PLUS - Manual (Page 41)

Note
You cannot change or delete a power-on password in
network server mode. You must run SETUP and turn off
network server mode first. See Chapter 2 of the Setup Guide
for instructions. Then you can change or delete the password
as described in Chapter 1 of this manual.
Using Special VGA Features
Your built-in VGA (video graphics array) display adapter
supports both standard VGA monitors and multifrequency
monitors with analog connectors. The VGA adapter operates in
all standard VGA resolutions without requiring any device
drivers. However, if you are using a monitor that supports
extended VGA features, you may want to use one or more of
the device drivers provided on the Utility diskettes.
If you are using your computer’s VGA feature connector and
Install VGA device drivers if you want to use these features:
Resolutions up to 800 x 600 or 1024 x 768 (non-interlaced) in
graphics modes with 16 colors
Resolutions up to 640 x 480 in graphics modes with 256
colors
132-column text mode in 16 colors
Graphics cursor movement performed by the built-in VGA
hardware.
Enhancing System Operations 2-9