Casio YA-W72M User Guide - Manual (Page 59)

59
4.
Edit the file contents in accordance with information in the table below. An
asterisk (
*) indicates the factory default setting.
To select this as the startup default tool: Change line under [MODE] to this:
Pen * Type=pen
Marker Pen Type=marker
To select this as the startup default Pen color: Change first line under [PEN] to this:
Red * Color=red
Blue Color=blue
Black Color=black
Yellow Color=yellow
To select this as the startup default Pen line
thickness:
Change second line under [PEN] to this:
Fine * Width=thin
Normal Width=normal
Thick Width=bold
Extra thick Width=extrabold
To select this as the startup default Marker Pen
color:
Change first line under [MARKER] to this:
Red Color=red
Blue Color=blue
Black Color=black
Yellow * Color=yellow
To select this as the startup default Marker Pen
line thickness:
Change second line under [MARKER] to this:
Fine Width=thin
Normal Width=normal
Thick * Width=bold
Extra thick Width=extrabold
To select this as the capture image boundary
color:
Change first line under [SHAPES] to this:
Red Color=red
Blue Color=blue
Black * Color=black
Yellow Color=yellow
To select this as the capture image boundary
thickness:
Change second line under [SHAPES] to this:
1 pixel to 100 pixels
(Factory default: 20 pixels) Width={line thickness value}
For example, to specify a 15-pixel thick line, specify:
“Width=15”.