Casio YA-W72M User Guide - Manual (Page 48)

48
Changing Presentation Mode Startup Default Settings
You can use the procedure in this section to edit the contents of the startup default setup file, which
specifies the initial Presentation Mode startup default settings of the items listed below.
z Startup default tool (Pen, Marker Pen, or Arrow)
z Startup default Pen color and line thickness
z Startup default Marker Pen color and line thickness
z Startup default Shapes color and line thickness
Important!
z Making changes to the startup default setup file runs the risk of causing Interactive
Whiteboard for CASIO operation problems. Exercise care whenever making changes.
To edit the Presentation Mode startup default setup file
1.
If Interactive Whiteboard for CASIO is running, exit it.
2.
On your computer, open the folder named “Interactive Whiteboard for CASIO” at
either of the locations below.
– Windows XP:
C:\Documents and Settings\{login user name}\My Documents\Interactive Whiteboard for
CASIO
– Windows Vista, Windows 7 or Windows 8:
C:\Users\{login user name}\Documents\Interactive Whiteboard for CASIO
z In the folder, you will find a file named Presentation.ini, which is the Presentation Mode startup
default setup file.
3.
In the folder you opened in step 2, above, double-click Presentation.ini.
z This will start up Notepad, and display the default setup file contents.
4.
Edit the file contents in accordance with information in the table below. An
asterisk (
*) indicates the factory default setting.
To select this as the startup default tool: Change line under [MODE] to this:
Pen * Type=pen
Marker Pen Type=marker
Arrow Type=presentation
Startup default tool
Startup default Pen color and line thickness
Startup default Marker Pen color and line thickness
Startup default Shapes color and line thickness
B