KACO Powador 16.0 TR3 User Manual
Page 33

C o n f i g u r a t i o n a n d O p e r a t i o n
Page 34
Operating Instructions Powador 16.0 TR3, 18.0 TR3_EN
Country-
spec. setting
Menu
level
Display/
Setting
Action in this menu/meaning
All countries
0
1
2
3
1
Interface
If the inverter is a terminal unit: Activate termination
(“Bus termination” menu item)
Assign a unique RS485 bus address to the inverter
(“proLOG address” menu item). The address must
not be the same as that of another inverter or a
proLOG unit.
0
1
2
3
1
S0 pulse rate
Set the pulse rate of the S0 connection.
DE
0
1
2
3
1
Activ. Relay 33
Releases the use of the fault signal relay for internal con-
sumption control relay 33.
1.
Enter the password.
2. Confi rm the entry with the OK button.
3. Activate or deactivate the home feed-in function.
NOTICE: Activating this option enables the menu item
Relay 33 set.
0
1
2
3
1
Relay 33 set.
Defi ne the switch-on power in kW that needs to be
available on an uninterrupted basis for 30 minutes
before the home feed-in is activated.
Defi ne the switch-on time (operating time of relay
33 after activation).
NOTICE: This menu item is only available if you have
selected the “On” option for the menu item “Activ. Relay
33” in the “Settings” menu.
All countries
0
1
2
3
1
Quick start
Reduce the waiting times during the self test by
pressing the “Activate” button.
0
1
2
3
1
Logging interval
Set the time between two log data recordings.
0
1
2
3
1
Log data backup
The inverter supports the backing up of all recorded
yield data to a connected USB storage device.
Activate or deactivate log data backup.
0
1
2
3
1
Display
Confi gure the contrast setting for the display.
Set the length of time without user input after
which the backlighting of the LCD switches off .
Alternatively: activate or deactivate backlighting
permanently by selecting “On” or “Off ”.
0
1
2
3
1
Date & time
Set the time and date.
NOTICE: For self-diagnostic purposes, the inverter car-
ries out a daily restart at midnight. To avoid having a
restart occur during feed-in operation and to always
obtain reliable log data, ensure that the time is correctly
set.
0
1
2
3
1
Ethernet
Assign a unique IP address.
Assign a subnet mask.
Assign a gateway.