KACO Powador 16.0 TR3 - Manual (Page 30)

C o n f i g u r a t i o n a n d O p e r a t i o n
Operating Instructions Powador 16.0 TR3, 18.0 TR3_EN Page 31
1
3
4
2
8.2 Initial start-up
When started for the fi rst time, the inverter displays the confi guration assistant. It takes you through the settings
necessary for the initial start-up.
NOTICE
After confi guration is completed, the confi guration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected
parameter menu. The other settings can still be changed in the confi guration menu.
NOTICE
The sequence of the settings required for initial start-up is preset in the confi guration assistant.
Initial confi guration
 In order to select a setting, press the up and down buttons.
 To select the next menu item, press the OK button.
 To return to the most recently selected menu item, press the ESC button.
 Carry out the required settings.
Press the OK button in the last menu item.
» You have completed the initial confi guration. The inverter begins to operate.
8.3 Menu structure
8.3.1 Display on the LCD
Fig 14: Main menu
Key
1 Display of the menu level (0, 1, 2) 3 Active menu (example: main menu)
2 Designation of the active menu 4 Menu items of the next lower menu level
Settings
Information
Vendor
Main menu
Measurements Generator
Grid
Power control
Unit temperature
Yield counter
Yield today
Total yield