2 graphical display – KACO Powador 16.0 TR3 User Manual
Page 28

C o n f i g u r a t i o n a n d O p e r a t i o n
Operating Instructions Powador 16.0 TR3, 18.0 TR3_EN
Page 29
Operating state
LEDs
Display
Description
Feed-in operation
Power fed into the grid
or measured values
The green “Operating” LED is illuminated.
The green “Feed-in” LED is illuminated.
The “Feed-in” icon appears on the
desktop.
The inverter feeds into the grid.
Non-feed-in
operation
Status message
The display shows the corresponding
message.
Voltage
Fault message
The display shows the corresponding
message.
The red “Fault” LED is illuminated.
8.1.2 Graphical
display
The graphical display shows measured values and data and allows the confi guration of the inverter using a graphi-
cal menu. In normal operation, the backlighting is switched off . As soon as you press one of the control buttons,
the backlight is activated. If no button is pressed for an adjustable period of time, it switches off again. You can also
activate or deactivate the backlighting permanently. In sleep mode, the inverter deactivates the display regardless
of the selected setting.
NOTICE
Depending on the tolerances of the measuring elements, the measured and displayed values are not
always the actual values. However, the measuring elements ensure maximum solar yield. Due to
these tolerances, the daily yields shown on the display may deviate from the values on the grid
operator’s feed-in meter by up to 15%.
After being switched on and after the initial start-up is complete, the inverter displays the start screen (the desktop).
If you are in the menu and do not touch the control buttons for two minutes, the inverter returns to the desktop.
For information about initial start-up, see section 8.2 on page 31.
Fig 13:
Desktop
Key
1
Current date
6
Status bar
2
Current power
7
Current time
3
Menu indicator
8
Feed-in indicator
4
Daily yield
5
Annual yield
1
2
3
4
5
6
7
8