KACO XP10U-H4 - Manual (Page 31)

C o n f i g u r a t i o n a n d O p e r a t i o n
Installation Instructions blueplanet XP10U H4 / H6 and XP10U H4 / H6 PSD Page 31
8 Confi guration and Operation
8.1 Controls
The inverter has a backlit LCD as well as three status LEDs. The inverter is operated using six keys.
1
2
3
4
5
6
7
Figure 23: Control panel
Key
1 “Operating” LED 5 4-way key
2 “Feed-in” LED 6 “Enter” key
3 “Fault” LED 7 “ESC” key
4 LCD
8.1.1 LED indicators
The three LEDs on the front of the inverter show the diff erent operating states.
The LEDs can take on the following states:
LED illuminated LED fl ashing LED not illuminated
The LED indicators show the following operating states:
Operating state LEDs Display Description
Start The green “Operating” LED is illuminated
if an AC voltage is present,
independently of the DC voltage.
Feed-in start Power fed into the grid or
measured values
The green “Operating” LED is illuminated.
The green “Feed-in” LED is illuminated after
the country-specifi c waiting period*.
The inverter is ready to feed in, i.e. is on the
grid.
You can hear the line relay switch on.
* The waiting period ensures that the PV array voltage continuously remains above the power delivery limit of 250 V.