KACO blueplanet 3.0 - 4.6 TL1 User Manual
Page 41
EN
Configuration and Operation
Operating Instructions for KACO blueplanet 3.0-4.6 TL1
Page 41
8.4.1 USB
interface
Use an external USB storage device to read operating data saved in the inverter.
Reading log data
NOTE
The USB interface is approved solely for use with USB fl ash storage devices (“USB sticks”). The max-
imum available current is 100 mA. If a device with a higher power requirement is used, the power
supply for the USB interface automatically shuts down to protect the inverter from damage.
Reading log data
1.
Connect a suitable USB storage device to the USB interface on the underside of the inverter.
2. Open the “Log data display” menu.
3. Select the “Save to USB” item.
4. Select the desired log data using the 4-way button.
5. Press the OK button.
»
The inverter saves the selected log data to the USB storage device.
8.4.2 Web
server
The inverter has an integrated web server. After confi guring the network and activating the web server in the Set-
tings menu, you can open the web server from an Internet browser. The language version of the website delivered
by the web server is adapted dynamically to the pre-set language preferences in your Internet browser. If your Inter-
net browser requests a language that is unknown to the inverter, the web server uses the menu language set in the
inverter.
Setting up the web server
Confi guring the Ethernet interface
↻ You have connected the inverter to your network.
1.
Open the Settings/Ethernet menu.
2. Assign a unique IP address.
3. Assign a subnet mask.
4. Assign a gateway.
5. Save your settings.
Using the web server
To avoid problems with incompatibility, use the most recent version of your Internet browser. JavaScript must be
enabled in the browser settings to display the web server correctly.
NOTE
You can also access the web server of the inverter via the Internet. To do this, additional settings of
your network confi guration, particularly your Internet router, are required.
Note that communication with the inverter is carried out over an unsecured connection, particularly
in the case of a connection over the Internet.