KACO blueplanet 3.0 - 4.6 TL1 - Manual (Page 29)

EN
Configuration and Operation
Operating Instructions for KACO blueplanet 3.0-4.6 TL1 Page 29
Authorised electrician
Operating status LEDs Display Description
Feed-in operation Power fed into the grid
or measured values
The green "Operating" LED is lit.
The green “Feed-in” LED is illuminated.
The “Feed-in” icon appears on the desk-
top.
The inverter feeds into the grid.
Non-feed-in opera-
tion
Status message The display shows the corresponding
message.
Fault Fault message The display shows the corresponding
message.
The red "Fault" LED is illuminated.
8.1.2 Graphical display
The graphical display shows measured values and data and allows the confi guration of the inverter using a graphi-
cal menu. In normal operation, the backlighting is switched off . As soon as you press one of the control buttons, the
backlighting is activated. If no button is pressed for an adjustable period of time, it switches off again. You can also
activate or deactivate the backlighting permanently. In sleep mode, the inverter deactivates the display regardless
of the selected setting.
1
2
3
4
5
6
7
8
Figure 31: Desktop
Key
1 Current date 6 Status bar
2 Current power 7 Current time
3 Menu indicator 8 Feed-in indicator
4 Daily yield
5 Annual yield
After being switched on and after initial commissioning is complete, the inverter displays the start screen (the
desktop). If you are in the menu and do not touch the control buttons for two minutes, the inverter returns to the
desktop.
NOTE
Depending on the tolerances of the measuring elements, the measured and displayed values are not
always the actual values. However, the measuring elements ensure maximum solar yield. Due to
these tolerances, the daily yields shown on the display may deviate from the values on the grid
operator’s feed-in meter by up to 15%.