KACO blueplanet 3.0 - 4.6 TL1 - Manual (Page 28)

EN EN
Configuration and Operation
Page 28 Operating Instructions for KACO blueplanet 3.0-4.6 TL1
Authorised electrician
8 Confi guration and Operation
8.1 Controls
The inverter has a backlit LCD as well as three status LEDs. The inverter is operated using six buttons.
1
2
3
4
5
6
7
Figure 30: Control panel
Key
1 "Operating" LED 5 4-way button
2 "Feed-in" LED 6 “OK” button
3 "Fault" LED 7 “ESC” key
4 LCD
8.1.1 LED indicators
The three LEDs on the front of the inverter show the diff erent operating states.
The LEDs can display the following states:
LED illuminated LED fl ashing LED not illuminated
The LED indicators show the following operating status:
Operating status LEDs Display Description
Start The green "Operating" LED is illuminated
if an AC voltage is present,
(independently of the DC voltage).
Feed-in start Power fed into the grid
or measured values
The green "Operating" LED is lit.
The green "Feed-in" LED is illuminated
after the country-specifi c waiting period*.
The inverter is ready to feed in, i.e. is on
the grid.
You can hear the grid relay switch on.
* The waiting period is used for network monitoring and ensures that all network parameters are in the permissi-
ble range.
For country-specifi c waiting periods, see our website at http://www.kaco-newenergy.de/.