KACO blueplanet 3.0 - 4.6 TL1 - Manual (Page 16)

EN EN
Mounting
Page 16 Operating Instructions for KACO blueplanet 3.0-4.6 TL1
6.1 Unpacking
CAUTION
The inverter is very heavy – risk of injury!
› Please pay attention to the weight, higher centre of gravity and areas for lifting the unit.
› Select suitable mounting location and mounting base.
› Use mounting material corresponding to or included with the base for mounting the inverter.
› Transport and install the inverter with at least 2 persons.
2
3
1
4
5
Figure 6: Unpacking the inverter Figure 7: Lifting the inverter
Key
1 Carton 4 Centre of gravity of the inverter
2 Protective packaging 5 Area for lifting
3 Inverter
Unpack inverter
1. Open carton at the front.
2. Remove installation material and documentation.
3. Pull up top protective packaging for removal.
4. Remove inverter from the packaging.
5. Place the protective packaging back into the carton.
6. Lift the inverter at the intended areas (see Figure 7).
» Continue mounting the inverter.