SMA SMC 7000HV Installation - Manual (Page 79)

SMA Solar Technology AG Decommissioning
Installation Manual SMC70HV11-IA-IEN112970 79
7. Remove the inverter upwards from the wall
mounting bracket.
8. Use the side handles (above and below) or a steel
rod (maximum diameter 30 mm) to transport the
inverter. The rod must be pushed through the
enclosure openings.
☑ The inverter is disassembled.
10.2 Packing the Inverter
If possible, always pack the inverter in its original packaging. If it is no longer available, you can also
use an equivalent carton. The carton must be completely closeable, have a handle system and be
made to support both the weight and size of the inverter.
10.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between
‒25°C and +60°C.
10.4 Disposing of the Inverter
Dispose of the inverter at the end of its service life in accordance with the locally applicable disposal
regulations for electronic waste. Alternatively, send it back to SMA Solar Technology AG with
shipping paid by sender, and labeled "ZUR ENTSORGUNG" ("FOR DISPOSAL") (contact see page
85).