SMA SMC 7000HV Installation - Manual (Page 57)

SMA Solar Technology AG Opening and Closing
Installation Manual SMC70HV11-IA-IEN112970 57
4. Unlock and disconnect all DC connectors using a
3.5 mm screwdriver:
– Insert a screwdriver into one of the side slots (1).
– Disconnect DC plug connectors (2).
☑ All DC plug connectors are disconnected from
the inverter. The inverter is entirely disconnected
from the PV array.
5. Ensure that no voltage is present at the DC plugs on
the inverter.
☑ If voltage is present, check the installation.
DANGER!
Danger to life due to high voltages in the inverter!
The capacitors in the inverter require 5 minutes to discharge.
• Wait 5 minutes before opening the inverter.