SMA SMC 7000HV Installation - Manual (Page 19)

SMA Solar Technology AG Mounting
Installation Manual SMC70HV11-IA-IEN112970 19
2. Secure the wall mounting bracket to the wall using
appropriate screws and washers.
3. Hang the inverter onto the wall mounting bracket
using the opening for this purpose in the rear of the
enclosure.
CAUTION!
Risk of injury due to the heavy weight of the inverter!
The inverter weights 65 kg.
• Attach the wall mounting bracket with the corresponding mounting material
(depending on the surface).
• Use the side handles (above and below)
or a steel rod (maximum diameter of
30 mm) for transport and mounting.
The rod must be pushed through the
enclosure openings.