beautypg.com

2 display messages during the startup phase, Display messages during the startup phase – SMA SMC 7000HV Installation User Manual

Page 50

background image

Commissioning

SMA Solar Technology AG

50

SMC70HV11-IA-IEN112970

Installation Manual

6.2 Display Messages During the Startup Phase

• After commissioning, the inverter displays the device

type in the startup phase.

• After 5 seconds or when you tap again on the

enclosure lid, the firmware version of the internal
processors is displayed by the inverter.

• After a further 5 seconds or when you tap again, the

configured country standard is displayed by the
inverter (example: "GER/VDE 0126-1-1").

Show display messages again (valid from firmware version 2.10)
If you want to view the display messages of the startup phase again while in normal
operation, double tap the enclosure lid.

See also other documents in the category SMA Equipment: