SMA SMC 7000HV Installation - Manual (Page 60)

Opening and Closing SMA Solar Technology AG
60 SMC70HV11-IA-IEN112970 Installation Manual
5. Check the Electronic Solar Switch for wear, as
described in section 8.3 and attach it firmly.
6. Switch on the miniature circuit-breaker.
7. Check whether the display field indicates a normal
operating state (see section 6 "Commissioning"
(page 49)).
☑ The inverter is now closed and in operation.
NOTICE!
Manipulating the connector in the handle can damage the
Electronic Solar Switch!
The connector inside the handle must remain movable in order to ensure proper contact.
Tightening the screw voids all warranty claims and creates a fire risk.
• Do not tighten the connector screw in the Electronic Solar Switch handle.
NOTICE!
Damage to Electronic Solar Switch!
If it is not correctly connected, the Electronic Solar Switch can be damaged by
high voltages.
• Plug the handle firmly onto the socket of the Electronic Solar Switch.
• Ensure that the Electronic Solar Switch is securely seated.