SMA SMC 7000HV Installation - Manual (Page 32)

Electrical Connection SMA Solar Technology AG
32 SMC70HV11-IA-IEN112970 Installation Manual
4. Push the cable gland towards the thread and tighten it (torque: 2 Nm).
☑ The DC connectors are now assembled and can be connected to the inverters, as described in
section 5.4.4 "Connecting the PV Array (DC)" (page 34).
☑ If the stranded wires are not visible, the
cable is not correctly positioned.
• Loosen the clamping clip. To do so, insert a
3.5 mm screwdriver into the terminal clamp
and lever it out.
• Remove the cable and go back to step 1.
Result Measure