SMA BEAM-BT-11 - Manual (Page 78)

Troubleshooting SMA Solar Technology AG
78 BeamBT11-BA-BEN112713 User Manual
Computer reports that
the USB device can
generate greater
power Computer does not have a USB 2.0
port or the Sunny Beam is
connected to a USB port that is not
supported by USB 2.0.
Computer displays the message as
the Sunny Beam supports USB 2.0. Message does not influence the
operation of the Sunny Beam.
Tip: You can switch off the message.
However, this will mean that other
USB errors will also no longer be
reported. For this purpose, proceed
as follows. These steps are for
Windows XP and may be different
in other operating systems:
• Right-click on My Computer
and select Device Manager.
• Open the USB Controller
entry in the Device Manager.
• Right-click on Host
Controller.
• Select Properties.
• Select Advanced.
• Activate Do not display USB
errors (enter checkmark).
Problem Cause Rectification