SMA BEAM-BT-11 - Manual (Page 51)

SMA Solar Technology AG Settings
User Manual BeamBT11-BA-BEN112713 51
6.9 Changing the Language
1. If an unknown language is configured:
– Press and hold the control button for approximately 10 seconds until the SMA logo appears
on the display.
– Set the desired language.
– Select [>>].
– Select [Main menu].
2. If a known language is configured:
– Select Settings > Country settings > Language.
– Set the desired language.
6.10 Repeating the Plant Search/Requesting Data
When performing a new plant search, all existing data, CSV files, and settings in the Sunny Beam are
stored.
1. Set up the Sunny Beam at its intended installation location.
2. Select Settings > PV plant > New plant search.
3. Select [Search now].
☑ The plant search will start.
☑ "Plants found" appears. The NetID of your plant is shown.
✖ Is the NetID of your plant not shown?
• See section 10.