SMA BEAM-BT-11 - Manual (Page 43)

SMA Solar Technology AG Settings
User Manual BeamBT11-BA-BEN112713 43
1. Select Settings > PV plant > Change device name.
☑ "Change device name" appears.
2. Select the serial number or a previously assigned device name.
☑ The input page appears.
3. Select the arrow [ ] until the previous device name has
been deleted from the bottom of the display.
4. To cancel the entry, select the cross [ ].
5. Enter the desired device names:
– Turn the control button until the desired character has
been highlighted. For this purpose, avoid using umlauts
as these characters cannot be displayed correctly in the CSV files.
– Push the button.
☑ The selected character is shown at the bottom of the display.
– Repeat the steps until the desired device name has been entered.
6. Select the checkmark [ ]. In this way, you save the entered device name.