2 adding the sma bluetooth repeater to the plant, 3 setting the revenue per kwh, Adding the sma b – SMA BEAM-BT-11 User Manual
Page 66: Setting the revenue per kwh
Device Replacement/Plant Extension (Installer)
SMA Solar Technology AG
66
BeamBT11-BA-BEN112713
User Manual
7.2.2 Adding the SMA Bluetooth Repeater to the Plant
7.2.3 Setting the Revenue Per kWh
The revenue per kWh is the amount that you receive for each kWh fed into the power distribution grid.
The revenue is legally regulated. The Sunny Beam requires the amount in order to calculate the
revenue. If you retrofit inverters, a different revenue may apply for these inverters. You can therefore
set different revenues for inverters in the Sunny Beam. The default setting is the value 0.45.
1. Select Settings > Display options > Balance factors > Revenue/kWh.
2. To change the factor for all inverters, select Complete plant.
3. To change the factor for specific inverters, select the desired inverter.
4. Set the factor.
Procedure
See
1
Commission the SMA Bluetooth Repeater. For this purpose, set the
NetID of the plant for the SMA Bluetooth Repeater.
SMA Bluetooth
Repeater Installation
Manual
2
Commission the plant.
Inverter Installation
Manual
3
Repeat the plant search in the Sunny Beam.
Section 6.10