SMA BEAM-BT-11 User Manual
Page 23
SMA Solar Technology AG
Commissioning (Installer)
User Manual
BeamBT11-BA-BEN112713
23
5. Select [OK].
☑ "Data administration" appears.
6. On the "Data administration" page, you do not need to configure any settings if the Sunny Beam
is being commissioned for the first time. If a plant has already been detected by the Sunny Beam
and data has already been requested, see section 6.10.
7. Select [>>].
☑ "Establish connection" appears. Sunny Beam establishes a connection to the inverters and
devices with repeater function
*
and requests data.
☑ "Connected devices" appears. Inverters and
devices with repeater function* (
) are listed.
All devices are marked with a lock.
✖ Are not all devices marked with a lock?
• See section 10.
8. Set the plant password configured for the plant for
the user group "User":
– Select [Plant password].
☑ The input page appears.
– Select the arrow [
] until the plant password
(0000) at the bottom of the display has been
deleted.
– Select the desired characters one after another.
– To cancel the entry, select the cross [ ].
* SMA Bluetooth Repeater, SMA Bluetooth Repeater Outdoor, SMA Power Injector with Bluetooth
Devices connected
283617063
554326782
OK
Plant password