SMA BEAM-BT-11 - Manual (Page 68)

Maintenance and Care SMA Solar Technology AG
68 BeamBT11-BA-BEN112713 User Manual
8.1.2 Replacing the Accumulators
The accumulators must be replaced if they are no longer charging properly and this adversely affects
the operation of the Sunny Beam.
1. Open the underside of the accumulator compartment.
2. Remove the accumulators.
3. Insert new accumulators into the accumulator compartment. For this purpose, observe the
marking in the accumulator compartment.
4. Close the accumulator compartment.
☑ The Sunny Beam requests the time settings of the plant.
☑ "Time and date" appears.
Damage to the Sunny Beam due to unsuitable accumulators or accumulators with
different states of charge.
• Do not use any batteries.
• Accumulators of the wrong type may leak into the Sunny Beam. Only use accumulators, see
section (11).
• Accumulators with different states of charge may damage the Sunny Beam. Use and replace
the accumulators in pairs.