SMA BEAM-BT-11 - Manual (Page 49)

SMA Solar Technology AG Settings
User Manual BeamBT11-BA-BEN112713 49
6.6.5 Changing the Weight Unit of the CO
2
Avoidance
1. Select Settings > Country settings > CO
2
avoidance.
2. Set the desired unit.
6.7 Time Settings
6.7.1 Changing the Time Settings After Sunset
If you use the PV inverter, change the time settings (date, daylight saving time, time, time zone) of the
Sunny Beam only after the sun has set if possible. The PV inverters no longer feed in after the sunset.
The time difference therefore has no affect on the charts on the display of the Sunny Beam.
6.7.2 Changing the Date
1. Select Settings > Date & Time.
2. Select Date and set the desired date.
6.7.3 Changing the Time
1. Select Settings > Date & Time.
2. Select Time and set the desired time.
6.7.4 Changing the Time Zone
1. Select Settings > Date & Time.
2. Select the previously configured time zone.
3. Set the desired time zone.