SMA BEAM-BT-11 - Manual (Page 24)

Commissioning (Installer) SMA Solar Technology AG
24 BeamBT11-BA-BEN112713 User Manual
– Select the checkmark [ ]. In this way, you save the entered plant password.
☑ "Connected devices" appears. All devices are
marked with a checkmark.
✖ Are not all devices marked with a checkmark?
• See section 10 "Troubleshooting", page 71
9. Select [OK].
☑ "Time zone" appears.
Set the plant time and plant power
1. Select +1 - Berlin, Rome, Paris, Madrid and set the desired time zone.
2. Select [>>].
☑ "Time and date" appears.
3. Select Date and set the current date.
4. To switch to daylight saving time, select Daylight saving time.
5. Select Time and set the current time.
6. Select [>>].
☑ "Plant power" appears.
7. Select Plant power in kWp and set the plant power of the plant in kWp.
8. Select [>>].
☑ "Power today" appears. Sunny Beam is ready for operation. Sunny Beam loads the plant data
in the background. This process can take several minutes. During this time, you can change the
chart views.
283617063
554326782
OK
Devices connected
Plant password