HEIDENHAIN MSE 1000 User Manual

Page 84

Commissioning and preparing to measure

Channel setup

Operating Instructions

To view channel setup options:

Click the «Setup» button.

Select a channel from the Tree.

The Channel setup tab for the selected channel appears in the Setup screen.

Assign 1 V

or TTL

encoder type

1 V

and TTL encoder types are selected from a graphic list located on the right side

of the Setup screen content area when the Channel tab is selected.

Available 1 V

and TTL encoder types

Length gauge

Linear encoder

Rotary encoder

To assign a 1 V

or TTL encoder type:

Click and hold on the desired encoder graphic located in the graphic list.

Available channels appear as labeled green squares below the module graphic in
the Channel tab.

Drag the selected encoder graphic over the desired channel square and release the
button.

The selected encoder graphic appears below the module with a line connecting the
encoder to the channel.

Remove 1 V

or TTL

encoder assignment

To remove a 1 V

or TTL encoder type assignment:

Click and hold on the desired encoder graphic located below the module graphic in
the Setup tab.

Drag the selected encoder graphic away from its current location.

The encoder graphic is replaced with the Delete icon.

Release the button.

The selected encoder is removed from the channel assignment.