HEIDENHAIN MSE 1000 - Manual (Page 40)

Software setup
MSEsetup overview
40 Operating Instructions
Data screen buttons
Button Function
Excel: Opens the Microsoft Excel file for data capture.
Delete all: Deletes all data in the Data screen and Microsoft Excel file.
Reset: Resets the min and max data for all channels.
Mastering screen buttons
Button Function
Enable channel: Turns on mastering for an individual channel. This setting is
remembered when MSEsetup is restarted.
Disable channel: Turns off mastering for an individual channel. This setting is
remembered when MSEsetup is restarted.
Apply all: Applies a master offset based on the desired master position for each
channel.
Unapply all: Unapplies mastering for all channels. This feature does not disable
the channels individually but instead does not apply offsets to the actual position
values. Available only when supervisor mode is enabled.
Diagnostics screen buttons
Button Function
Function reserves: Opens Function Reserves information for EnDat devices.
Warning/Error: Opens the Warnings and Errors screen.