HEIDENHAIN MSE 1000 - Manual (Page 156)

Decommissioning
Release all modules
156 Operating Instructions
MSE 1201
(ID 747501-02) To disconnect the MSE 1201 (ID 747501-02) power cord:
Verify that there is no power at the source.
Un-wire the power cable from the source.
MSE 1202
(ID 747502-01) To disconnect the MSE 1202 (ID 747502-01) power cord:
Verify that the power cord is not plugged into the main power supply.
Turn the connector counterclockwise to loosen the M8 connector.
Remove the power cord connector from the power connector 13 on the front of the
module.
13.3 Disconnect data interface connections
Disconnect data
interface connections Data interface connections vary based on individual MSE 1000 system configurations.
Refer to "Data interface connections", page 27 for additional information on available
connections.
To disconnect data interface connections:
Disconnect all data interface connections by reversing the instructions presented in
the Data interface connections section.
Remove all device cables and mounting accessories.
13.4 Release all modules
Release modules Refer to "Releasing a module", page 22 for instructions on releasing modules.