HEIDENHAIN MSE 1000 - Manual (Page 83)

Commissioning and preparing to measure
Channel setup
Operating Instructions 83
8.3 Channel setup
The Channel setup tab provides options for configuring individual channels on a
module. Settings options are not visible if a device is not connected to a channel or the
connected device does not support the option.
EnDat encoder types are automatically recognized when an EnDat encoder is
connected to a module channel.
1 V
PP
, LVDT, TTL, and analog devices must be manually assigned when a device is
connected to a module channel and manually removed if the encoder is disconnected
from the module.
Input and output (I/O) channel assignments are created regardless of an active
connection to the channel. The channel assignment can be removed if an input or
output is not being used and reassigned if the channel is being used at a later time.
Compressed air channel assignments are created regardless of an active connection to
the channel.
Channel tab information:
Channel label
Display resolution
Unit of Measurement
Angle format
Error compensation
Scale Factor
Counting Direction
Channel setup tab